DIY Beachy Bar Stool Tutorial

Super Quick and Easy (and So Low-Cost) Flea Market Makeover

Would You Believe These Sea-Inspired Seats Cost Less Than $20 Each?!

Finally, another (long-ago-promised) cottage post! Yes, this is a project I also completed last summer and am just now getting around to posting (gulp). So many reasons/excuses about what's taken so long, but when it comes down to it, does it really matter?! Better late than never!

This project ties into last week's Banquette Table Refresh post (whether you loved it or hated it - some strong feelings on Hometalk this week!). But as a quick recap, we needed some extra space in the kitchen, so we added some built-in benches and a banquette table to make adequate space for some bar stools at the peninsula.

DIY Nautical Hardware Tutorial

DIY Nautical Rope Hardware Tutorial

An Inexpensive Option for Drawer Pulls and Knobs

I'm so happy I was able to finish my Vintage Chifferobe with a very easy DIY hardware project! When I finally got to the point where I was finished painting my cool estate sale find, all I needed was some new hardware. I popped out to the hardware store to check out my options, but I quickly realized that the knobs and pulls I liked were going to cost me about $40. Since I only paid $27 for the original piece, I couldn't bring myself to spend that much on the hardware. So I needed another plan.

At first, I came up with a temporary option, and since we have a "beachy" feel in our home, I thought about using rope for the drawer pulls. I planned to simply thread some rope through the hardware holes, and use that as the "pull." But I knew that could only be temporary, because the main people who would be using it are my kids, so the "hardware" was bound to take a beating. But I was willing to set it up as a temporary option until I came across something affordable. I just didn't know what I would do about the round knobs. But I bought some rope (I used Everbilt Manila Rope 1/4" x 50'), and decided to see what happened.  

Then when I came home and started to evaluate my plan, it occurred to me that maybe I could wind this rope around the original wood hardware. The rope was really stiff, so I had my doubts that it would hold, but I figured I had nothing to lose, so I got out my glue gun and gave it a shot! And it was thrilled when I realized it was going to work.

The original wood hardware was white, but I was worried it would show through under the rope, so I painted it brownish to try to avoid that. You can see, I didn't get too picky with that process... I just didn't want them to be bright white.

For the drawer pulls, I started with the front/face. I put some hot glue on the top corner, and then applied the rope on top. I held the rope in place for a good 10-20 seconds with this step so it was really secure. Then I applied more hot glue, put the rope on top, and continued the process around in an "oval" shape. When I got to the middle, everything got kind of meshed together, so it was easy to just cut the rope and sort of shove it in the remaining space (on top of a spurt of hot glue). You don't have to be very exact, because the texture of the rope covers little mistakes. Then I wound the rope around the sides of the drawer pulls to cover that space, too. Originally I didn't plan to do that, but I decided I liked it better when the whole thing was covered in rope.

The spherical knobs were even easier. Just start at the back and wind around to the front/center. Same rule applies for finishing: just kind of shove it into the middle.

The trickiest part for me was using the hot glue gun. It was hard to know how much glue to use, and you can see from the pic above, I definitely used too much at first (but you can't tell unless you get really close). You start to get the hang of it after a little while. But I think the most important part was making sure you hold the rope onto the glue until it really sets. I think 10-15 seconds is a good time frame. Otherwise you end up with lots of those stringy hot-glue threads all over the place, and they're a pain to clean up.

And really, that's about it! Just reattach the hardware, and you're ready to go! I was so happy to be able to reuse the original hardware with minimal expense (I think the rope was $5.60, and I have more leftover).

Even though I had the old hardware to reuse, you could also just purchase inexpensive wood knobs and pulls and do this to dress them up. The wood hardware is much cheaper than metal. I just did a quick google search and found the same spherical knobs for $0.99).

I'm happy with how the entire chifferobe turned out, but I'm even happier with the price :)

Vintage Chifferobe for Toy Storage

The Twenty Seven Dollar Vintage Chifferobe

Chic on the Cheap: How to Hide Those Toys

After months of sitting in my garage, my "vintage chifferobe" is finally finished, and better yet, it's making our family room feel even more cozy. This piece continues my stream of trying to find affordable furniture to fill our new home; you can read more about where I picked up this piece here. Or the quick version: I bought it at an Estate Sale for $27. Adding in the cost of paint and materials, it cost me around $50 total. Not bad for a piece that takes up a substantial space in one of the most lived-in rooms in the house.

Basically, I painted this piece using Annie Sloan Chalk Paint in "Florence," using a couple coats of Annie Sloan clear soft wax after the paint application. I've said it before, but it's worth saying again, ASCP is my favorite paint, in essence, because of its RICHNESS: richness of color, of texture, and of variability. You can do so much with it. I invested in two of Annie Sloan's books (Quick & Easy Paint Transformations and Creating the French Look), and that's helped me get some ideas. But there are also classes out there. Near me, Daniella at Junktique Recycling offers them frequently. I'm planning to finally get to one this summer! 

Every time I've used ASCP in the past, I chose to distress my pieces at the end. For the chifferobe, I just wanted a clean, sharp finish, so all I did after painting was apply a couple coats of clear wax. I also chose to paint the outsides of the drawers and inside of the cabinet, too, because I plan to use this piece as toy storage, and I foresee a lot of unclosed drawers in the future... so why not give them a little love, too? I used Behr "Oregano Spice" for the green on the inside to save some money (in an ideal world, I'd have used ASCP in here, too). 

The chifferobe remains to be the perfect hiding spot for a little one, just like the women who sold it to me said they used to do with they were children.

 

The knobs were an unexpected part of the project, but I'm so happy with how they turned out! I had planned to simply buy some new hardware to "dress up" the piece. But after going to the store and choosing what I liked, I realized the hardware would cost me about $40! More than the original cost of the piece... I couldn't rationalize that purchase, so reluctantly, I put the knobs and drawer pulls back, and resolved to figure out a more creative solution, hence, the DIY Nautical Rope Hardware. I bought some rope for $5 and, using the rope and hot glue, I outfitted the original hardware (you can find that tutorial here).

I'm happy with how it turned out, but still wish I knew more about its original form and function. When was it made? How was it used? If you know any of that, please fill me in!