Tuesday, May 19, 2015

DIY Scooter and Bike Streamers

This Easy, Inexpensive Scooter Project Adds Instant Punch

Give Your Little One's "Ride" Some Extra Personality


I actually got this idea from the Micro Kickboard website (my kids are obsessed with their Microkick Scooters! Seriously, best investment we've ever made for them!) when I was looking through their scooter accessories. They sell streamers very similar to this, but the colors are a bit limited, and they're asking $12.99 for a pair; I knew I could make these for a fraction of the price and get my kiddos' input on the colors they'd like.

I was lucky to have all these materials in my craft room stash, so the project didn't cost me anything in "new" supplies. But you can easily pick up everything you need at a fabric store.

Materials for DIY Scooter Streamers:

  • Elastic: For each streamer (remember, you need to make 2), I used purple elastic that was 1.5" wide x 5" long
  • Ribbon: For each streamer, I used 6 strands of coordinating 24" ribbon
  • Fray Check (available at fabric store)
  • Needle and Thread
  • Hot Glue Gun

Tutorial for DIY Scooter or Bike Streamers:

Step 1 - Measure and Cut: Determine what size elastic band you will need. For the Micro Maxi handlebars shown here, I determined that I wanted the finished size to be 4" so they would fit snugly. Because of that, I cut the elastic to 5" (giving a 1/2" seam allowance for attaching the ends).

Step 2 - Sew Ends Together:
Using a needle and thread (if you can figure out how to do it on a machine, let me know--it was way too small for me to get it to work!), overlap the ends about 1/2", use a pin to hold in place, and sew a rectangle shape to close the ends together.

Below is what I mean about the rectangle shape.  That shape seems to give it a more secure closure.

Step 3 - Cut and Prepare Ribbon: I used 6 ribbons for each streamer. First, cut to desired size (mine were 24" long), then lightly coat the ends with Fray Check (to eliminate the fraying).

Step 4 - Connect Ribbons: Find the centers of each piece of ribbon. Then, using needle and thread, join all 6 ribbons together. I just went back and forth through the tops and bottoms several times until I felt it was secure.

Step 5 - Attach Ribbons to Elastic: I didn't show this, but I recommend HOT GLUING the ribbons to the elastic first, then following by with sewing them together. Also, IMPORTANT: make sure to glue the RIGHT SIDE (the design side) to the outside of the elastic (it may seem counter-intuitive, but if you don't do it that way, the design will be "inside-out"). 

And really, that's it! Amazingly simple! I already have a plan to make some patriotic ribbons for the Memorial Day and 4th of July, and really, the possibilities are endless. Your kids will have fun picking out their own themes. Plus, these would make great birthday gifts!

 I think it even gave my little one the illusion of more speed :)

Have fun!

Check out more DIY Kids Projects Here!

And, if we're not already connected, find me on Pinterest, Facebook, and Google+ so we can start sharing ideas together!


  1. What a great idea! Those things wear out or fall apart too fast and yours are definitely way cheaper! Thanks so much for pinning it to the P3 Party Board! I am featuring you Friday on the P3 Party! So look for a little traffic from me on social media!

  2. An electric scooter is nice if you would like a vehicle which will prevent money and solely be required for creating short journeys on town streets. operational expenses also are less since they're a lot of dependable and want less repairs. If you want to read more on electric scooters then please visit our website. Here is our website link:

  3. Awesome idea to make the scooter look more attractive. These electric scooters for kids are safe and great. They can enjoy much when riding. Make sure you equip them with good equipment like helmet, pads,...

  4. This article help me. Thank your for sharing.

  5. It is good to have DIY scooter, but if we go with electric scooter for adults, we should consider buying one.

  6. Scooters everywhere! It seems like there is a scooter craze in our neighborhoods, and young children are getting into this activity in a big way. If your child has a kick scooter and now is ready for something of the motorized variety it might be time to consider an electric powered scooter. Kick Scooter

  7. There is even a larger and faster seat scooter that adults and kids can use and are also very popular. Ancheer

  8. Electric scooter with seat has been the best choice since it gives more supports and features when comparing with the traditional ones

  9. Hi, I find reading this article a joy. It is extremely helpful and interesting and very much looking forward to reading more of your work.. razor-electric-scooter-battery

  10. with all the recent improvements in speed they may perhaps have the ability to serve your requirements. electric scooter

  11. Generally scooters have dependably been a route for us to journey around our neighborhoods in a lackadaisical manner. Scooters are established in a past time when they were for the most part for more youthful individuals and children.Best off road scooters

  12. A delightful perusing for any individual who cherishes perusing online journals. imo for Windows 10 (Windows)

  13. What amount of fun is that? The third style of seated electric scooter is somewhat of a "mixture" between the "push" style and an electric bicycle. Normally, they lie lower to the ground than a bicycle, and are expected for more established children and grown-ups.Best electric scooter seats


Reactions? Questions? Suggestions? I would love to hear your comments and I read them all--even if it's an old post!

Unfortunately, I had to disallow anonymous commenting because of too many spammers :(

Look forward to hearing from you!